Novastar A9S LED Receiving Card

LED Display Accessories
LED Receiving Card
Resolution ：512×512
RGB data output ：32
2 Years Warranty
Made By Xi'an NovaStar Tech Co.,Ltd

Novastar A9S LED Receiving Card. Nova A9S LED display Control Card LED Receiver Card for full color LED screen. Mini Novastar A9S LED display controller card support resolution 512×512 with 32 group RGB data output.

Novastar A9s is a high-end receiving card developed by NovaStar. It has a small size andfeatures a large loading capacity, with a single card loading up to 512×512 (PWM IC)pixels. .

Resolution ：512×512

RGB data output ：32

MOM Interface ：Support

Piexl level color and brightness calibration ：Support

Receving Card Backup Support ：Support

RCFG Backup and Read ：Support

Auto Calibration ：Support

Cabinet Mapping ：Support

18bit+ ：—

ClearView ：—

Free Rotation ：—

Low latency ：Customize

PRODUCT FEATURES

The A9s supports pixel level brightness and chroma calibration by working with

NovaLCT and NovaCLB to perform calibration on each pixel. It can effectively

remove color discrepancies and greatly improve LED display image consistency. In

addition, it also supports image rotation in 90° increments, creating a richer image

and offering users the ultimate visual experience.

On-site setup, operation, and maintenance were all taken into account when

designing the hardware and software of the A9s, allowing for an easier setup, more

stable operation, and more efficient maintenance.

Advanced hardware design:

The small hardware footprint is suitable to applications with limited cabinet space and small pixel pitch.

Uses dust-resistant high-density connector to limit effects of dust and vibration,resulting in high stability and reliability.

Integrated network transformer features simple design and improved magnetic compatibility, helping user’s products to successfully pass the EMC certification.

Useful software design:

Supports LVDS transmission (supported by dedicated firmware program).

Supports smart module (supported by dedicated firmware program).

Supports quick seam correction.

Supports 3D function.

Supports auto module calibration.

Supports Mapping function.

Supports setting of pre-stored image on receiving card.

Supports management of module's Flash.

Supports voltage and temperature monitoring of card without use of peripherals.

Supports monitoring of Ethernet cable communication status (supported by dedicated firmware program).

Supports 5-pin LCD module.